FOX - FORK PARTS

Cart 0
Cart 0
Fox - Air Shaft Assembly
Fox - Air Shaft Assembly

Fox - Air Shaft Assembly

$108.00

Available Online
In Store call for Availability
Air Shaft Assembly 2019 34 SC 100mm Float LC NA2 1.214 Bore AL NP
Air Shaft Assembly 2019 34 150mm Float LC NA2 1.214 Bore AL NP
Air Shaft Assembly 2019 36 140mm Float LC NA2 1.287 Bore To Hat
Air Shaft Assembly 2019 36 150mm Float LC NA2 1.287 Bore To Hat
Air Shaft Assembly 2019 36 160mm Float LC NA2 1.287 Bore To Hat
Air Shaft Assembly 2021 38 160mm Float NA2 Inner Air Sleeve 1.214 Bore
Air Shaft Assembly 2021 38 170mm Float NA2 Inner Air Sleeve 1.214 Bore
Air Shaft Assembly 2021 38 180mm Float NA2 Inner Air Sleeve 1.214 Bore
Air Shaft Assembly 40 190mm Float NA2.1 +14.7CC NEG
Air Shaft Assembly 2021 36 170mm Float NA2 Spec ED F-S/PS-E/P-S 1.287 Bore
Air Shaft Assembly 2022 32 Gravel 40mm FLOAT NA (1.132 BORE) NP
Air Shaft Assembly 2022 32 Gravel 50mmFLOAT NA (1.132 BORE) NP
Air Shaft Assembly 34 130mm Float DMAS 1.194 Bore
Air Shaft Assembly 34 140mm Float DMAS 1.194 Bore
Air Shaft Assembly 34 150mm Float DMAS 1.194 Bore

FOX - FORK PARTS

Keep your suspension performing at factory levels with genuine FOX parts and fluids. 


How to Find the Correct Replacement Part for a Fox Suspension Fork

Getting the right part for your Fox fork depends on identifying the exact model, because many Fox parts are not interchangeable. The easiest way to do this is by finding the 4 digit ID code on the fork.

1. Find Your Fox ID Code

  • Look on the back of the lower leg of your fork for a 4 digit code (examples: C372, DH6P).
  • If you don’t see one, check for an 11 digit serial number stamped on the underside of the steerer tube, especially on older forks.(You may need to clean the area or use a flashlight).

2. Use the Fox Help Center

  • Go to tech.ridefox.com/bike.
  • Type your 4 digit code or serial number into the search bar.
  • This will show your fork’s model, year, travel, and the official Parts & Drawings for your fork.

3. Find the Correct Part

  • In the Parts & Drawings section, look for the exploded diagram of your fork.
  • Use the exact part numbers listed for your fork’s year and model.
  • Make sure you know your fork’s stanchion size (32/34/36/38/40mm).

4. If You Can’t Find a Code

  • Try to identify the model,year and spec of the fork.
  • Search the Parts & Drawings section, look for the exploded diagram of your fork.

 

BIKE TECH HELP CENTRE